Evolutions microstructurales et mécaniques de l’AS7G03 modifié au strontium au cours de l’étape de forge du procédé COBAPRESSTM

TL;DRAbstract

The COBAPRESSTM is a hybrid process consisting of forging a cast preform. In this thesis, we are interested in its application to make parts with an AS7G03 aluminum alloy modified with strontium. Microstructural evolutions in hot conditions and the mechanical properties resulted from are not well known for this cast alloy and constitute the present work. The first part of the study presents the results obtained by simulation with two finite elements analysis software Simufact and ABAQUS. We could see that the maximal deformation occurs in the parting surface with a deformation closed to 0.5 and a rate which cans reach 10 s-1. Deformation in the skin due to the preform surface roughness is considered. The second part exposes the microstructure in the parts after forging. These observations were made by optical micrography and also by EBSD. This microstructure is predominantly substructured but can be recrystallized for Zener-Hollomon parameters higher than 1012. The typical skin microst

Chat with Paper

AI Agents for this Paper