Collaborative Research on Thermo-Mechanical and Isothermal Low-Cycle Fatigue Strength of Ni-Base Superalloys and Protective Coatings at Elevated Temperatures in The Society of Materials Science, Japan (JSMS)

doi:https://doi.org/10.1520/stp11434s

Collaborative Research on Thermo-Mechanical and Isothermal Low-Cycle Fatigue Strength of Ni-Base Superalloys and Protective Coatings at Elevated Temperatures in The Society of Materials Science, Japan (JSMS)

Masakazu OKAZAKI,Koji Take,Kazuaki Kakehi,Yasuhiro YAMAZAKI,Masao Sakane,M Arai+8 more-2003-01-01

27

TL;DRAbstract

Results of collaborative research by “Subcommittee on Superalloys and Coatings” in The Society of Materials Science, Japan (JSMS), are presented, which cover the thermo-mechanical fatigue (TMF) and high temperature isothermal low-cycle fatigue (ILCF) strengths of Ni-Base superalloy, substrate alloys and the protective coatings. Three kinds of Ni-base superalloys were selected as the substrate: a single crystal alloy, CMSX-4; a directionally solidified alloy, CM247LC; and a polycrystalline alloy, IN738LC. On these substrate specimens the CoNiCrAlY alloy was coated by 250 μm in thickness by low pressure plasma spraying, and then aluminized. This process was managed and undertaken by one of member companies of the Subcommittee. The round robin TMF and ILCF tests were carried out under a strain ratio of -1 at temperature ranged between 400 and 900°C. In the former the tests were performed under the out-of-phase and diamond phase conditions in which the phase difference between strain and t

Chat with Paper

AI Agents for this Paper

Results of collaborative research by “Subcommittee on Superalloys and Coatings” in The Society of Materials Science, Japan (JSMS), are presented, which cover the thermo-mechanical fatigue (TMF) and high temperature isothermal low-cycle fatigue (ILCF) strengths of Ni-Base superalloy, substrate alloys and the protective coatings. Three kinds of Ni-base superalloys were selected as the substrate: a single crystal alloy, CMSX-4; a directionally solidified alloy, CM247LC; and a polycrystalline alloy, IN738LC. On these substrate specimens the CoNiCrAlY alloy was coated by 250 μm in thickness by low pressure plasma spraying, and then aluminized. This process was managed and undertaken by one of member companies of the Subcommittee. The round robin TMF and ILCF tests were carried out under a strain ratio of -1 at temperature ranged between 400 and 900°C. In the former the tests were performed under the out-of-phase and diamond phase conditions in which the phase difference between strain and t

Keywords

SuperalloyIsothermal processMaterials scienceMetallurgyLow-cycle fatigueComposite materialThermodynamicsMicrostructure

Chat

Click to start Chat