User Settings
Open AccessArticle10.17795/ajehe-164

Natural Arsenic Pollution and Hydrochemistry of Drinking Water of an Urban Part of Iran

8

TL;DRAbstract

Natural contamination of surface and groundwater resources with arsenic is a worldwide problem. The present study aimed to investigate and report on the quality of drinking water resources with special focus on arsenic presence in an urban part of Iran. Arsenic concentrations were measured by graphite furnace atomic absorption spectroscopy (GFAAS). In both surface and groundwater samples, arsenic concentrations ranged from 6 - 61 µg/L with an average value of 39 ± 20 µg/L. Concentration of arsenic, which was up to six times greater than guideline values (10 µg/L) indicates the presence of arsenic bearing materials in the geological structure of the region. It was found that the quality of treated surface water produced by the water treatment facility was good in respect to arsenic (9 µg/L) and solid content (EC = µs/cm). However, in drinking water samples of wells, total solids (mean EC = 1580 ± 150 µs/cm), total hardness (mean = 479 + 94 mg/L as CaCO3) and arsenic (mean = 42 + 16 µg/L

Chat with Paper

AI Agents for this Paper

Natural contamination of surface and groundwater resources with arsenic is a worldwide problem. The present study aimed to investigate and report on the quality of drinking water resources with special focus on arsenic presence in an urban part of Iran. Arsenic concentrations were measured by graphite furnace atomic absorption spectroscopy (GFAAS). In both surface and groundwater samples, arsenic concentrations ranged from 6 - 61 µg/L with an average value of 39 ± 20 µg/L. Concentration of arsenic, which was up to six times greater than guideline values (10 µg/L) indicates the presence of arsenic bearing materials in the geological structure of the region. It was found that the quality of treated surface water produced by the water treatment facility was good in respect to arsenic (9 µg/L) and solid content (EC = µs/cm). However, in drinking water samples of wells, total solids (mean EC = 1580 ± 150 µs/cm), total hardness (mean = 479 + 94 mg/L as CaCO3) and arsenic (mean = 42 + 16 µg/L

Keywords

ArsenicWater pollutionPollutionArsenic contamination of groundwaterNatural (archaeology)Water resource managementEnvironmental scienceEnvironmental chemistry

Chat

Click to start Chat