User Settings
Open AccessReport10.2172/4608032

TEMPERATURE OF A FLAT PLATE HAVING ALTERNATING ADIABATIC AND CONSTANT HEAT FLUX STRIPS ON ONE SIDE

J.H. Van Sant-1964-07-27
1

TL;DRAbstract

and their tilt angles were not seasonally adjusted. All of the collector arrays faced south and were tilted at 42/sup 0/ with respect to the horizon (to match the 42/sup 0/N latitude at ANL). All four collector systems started each day with their storage temperatures at 90/sup 0/C. During the day, each system was operated by its own solar controller. At the end of the day, the tanks were mixed and the temperature changes in the tanks were measured. The change in storage energy was calculated from the temperature change, the heat capacity of the storage system, and the pump energy. 6 refs., 5 figs., 5 tabs.

Chat with Paper

AI Agents for this Paper

and their tilt angles were not seasonally adjusted. All of the collector arrays faced south and were tilted at 42/sup 0/ with respect to the horizon (to match the 42/sup 0/N latitude at ANL). All four collector systems started each day with their storage temperatures at 90/sup 0/C. During the day, each system was operated by its own solar controller. At the end of the day, the tanks were mixed and the temperature changes in the tanks were measured. The change in storage energy was calculated from the temperature change, the heat capacity of the storage system, and the pump energy. 6 refs., 5 figs., 5 tabs.

Keywords

Adiabatic processSTRIPSTilt (camera)Heat fluxThermal energy storageEnergy storageMaterials scienceMeteorology

Chat

Click to start Chat