Thermal Fracture and Fatigue of Anodized Aluminum Coatings for Space Applications

TL;DRAbstract

A concern for the use of anodized aluminum as Space Station thermal control surfaces is the potential degradation of critical optical properties due to oxide coating cracking. This cracking may be induced by differential thermal expansion during hot adhesive bonding of the radiator assembly or during 30 years of exposure to sunlight/darkness cycles in low earth orbit (LEO). This paper summarizes investigations into the effects of temperature and humidity on coating stresses and cracking. Experimentally measured coating residual stresses after anodizing and sealing are shown to be strongly dependent on humidity. Two sets of tests are used to study cracking directly: one determines the temperature (Tc at which cracks first appear during a single heating cycle, while the other involves rapid thermal cycling (RTC) between maximum and minimum temperatures. The effects of several test parameters on cracking are reviewed, with special attention to temperature, coating thickness, and humidity.

Chat with Paper

AI Agents for this Paper